Description
Size: 50 mm x 50 metres.
According to ECE 104 standard.
Prevents accidents.
Increases driver safety.
Highest brightness.
Improves corporate image.
Strong resistance to high-pressure cleaning.
Resistant to most chemicals.
Easy to apply.
ASSEMBLY:
- The reflective film should be stuck on the back along all sides with yellow or red reflective tape.
- On the side, only the lower side needs to be pasted, as well as the upper corners with a yellow or white reflective tape.
- At least 80% of the total length and width should be plated.
- At least 0.25 metres (lower edge) from the ground.
- Maximum 1.5 metres high (upper edge) at the lower line mark.
- The distance between the reflective tape and the brake lights should be at least 20 cm.
- This applies to both contour/line and partial markings.


